HYDROGEN LEAK PROBE: CHS-HTR- PH-100-MS3
PORTABLE HANDHELD APPLICATION

Hydrogen Leak Probe, CHS-HTR-PH-100-MS3 is a portable handheld input device for HHLI-H2 which is a battery operated display and control unit.
-
This device contains a front end pre-amplification that can be trained for the ranges 0 to N% H2 in air (N = 1 to 10) or 0 to 2000ppm for full scale display.
-
A highly useful device for detecting and pin-pointing hydrogen leakages from within closed enclosures.
-
Vastly employed in hydrogen cooled power generators, hydrogen storage and filling stations and hydrogen transport lines.
-
Crucial from a safety, security and hydrogen hazard perspective.
-
It finds successful application in risk mitigation against explosion of VRLA batteries by early detection of hydrogen gassing from such battery cells. Promises to be a highly desirable tool.
-
Range option is user specified as per demands of one's application.
SPECIFICATIONS OF HYDROGEN LEAK PROBE - CHS-HTR-PH-100-MS3
|
1
|
Transducer
|
3 Wires in metal housing containing sensor. & Head On Pre-Amplifier in enclosed Metal Housing. Intrinsically safe. Exia II-C
|
2
|
Specificity & Range
|
Specific & selective only to Hydrogen; 0 to N % & 0 to 2000 PPM
|
3
|
Sensor Technology
|
Solid State Electrochemical Cell (Direct Partial Pressure Measurement of Hydrogen in gaseous Fluid based on Proprietary Indian Patent No. 252998 w.e.f 14/06/2007).
|
4
|
Dimensions
|
24ø x 93mm Length
|
5
|
Sensor Signal
|
Self Generated
|
6
|
Pre Amplification End Connection
|
3-wire, 2-wire supply (3.7 Volt DC), one wire output
|
7
|
Sampling
|
By Diffusion, Gas Aperture Φ 2mm
|
8
|
Housing Material
|
Brass & MS plated for non- corrosive, SS316 for corrosive environment, respectively.
|
9
|
Response Time
|
< 3 seconds
|
10
|
Accuracy
|
±10 % FSD
|
Specification subject to changes without prior notice, due to continuous R&D and development of Company’s Products |